The Cutting Edge Catalog
Account Login

Total Shield 5G Antenna

Total Shield 5G Antenna
This is an add-on item for use with the Total Shield. It can be purchased on the Total Shield product page when you buy the item, but if you already have a Total Shield, it can be bought separately here.

When fully implemented, 5G will broadcast in the 30 to 70 Gigahertz (gHz) range. (4G goes up to 6gHz, and the FCC has reserved up to 30gHz for military and civilian aircraft use.) Another version called 5GE (E stands for evolution) is being widely used by AT&T, and the Shield is already capable of diluting that frequency. With the new antenna, the unit now provides dilution to 5G.

The antenna is a silver alloy deposited on a piece of Mylar. It is tuned to the 30 to 70 gHz frequency band. In a normal state, the chip is inactive and does not interact with operation of the Shield. When a signal in the 30 to 70 gHz range is received, the strip becomes active and causes a phase shift to the incoming signal. This phase shift causes the wave to reflect the 5G signal back in the direction from which it came. The antenna reflection area range is up to 50 feet depending on proximity to the source antenna.

Simply stick the strip horizontally around the case either in the front or the back of the Total Shield. If you hold the paper up to the light, you will notice a small speck in the middle of the antenna; this is the chip. Mount the strip of paper so that the chip is on the lower side. We find it convenient to mount it above the LEDs on the front with the chip just above the green lamp.
Click here to see how the antenna looks on the Total Shield.

To order a Total Shield, click here.
Note: Because this antenna is a stick-on product that is difficult to remove, it is not returnable once it is placed on the unit, unless you are returning a Total Shield (purchased from Cutting Edge) that already has the sticker.

Price: $95.00
Customer Reviews
submit review